LionB » 30 июл 2008, 12:33
Так и дожно быть..... Используйте E-LCR
a little difference in each system.
SPNet feature could not be supported in case of iDCS, so a input data started from '0' have no problem.
Because there is no issue before function was added much to SPNet, this problem reported by you did not emerge greatly as issue.
But after Network Station could be assigned in 406,601,607 etc.,many problem were happened.
And, because OS7400 previous products has relatively few Total port number (Physical + Virtual + Group + Feature ID),
a problem such as reported by you did not become issue greatly.
Our system structure for total port number in each system is as following.
OS100 Total port number : about 0x300 ports --- 03xx ~ 09xx, 0*xx can be used except 00xx ~ 02xx.
OS500 Total port number : about 0x600 ports --- 06xx ~ 09xx, 0*xx can be used except 00xx ~ 05xx.
OS7200 Total port number : about 0x400 ports --- 04xx ~ 09xx, 0*xx can be used except 00xx ~ 03xx.
OS7400 Total port number : about 0xC00 ports --- 0xxx can not be used ..